SupaStox GT12 / Show Your Ride

[Chequered Flag Racing]

as per title

get posting

cuople to be getting on with

Slinga's
http://www.oople.com/forums/showpost...1&postcount=71

Karl's
http://www.oople.com/forums/showpost...1&postcount=65

[stegger]

Here's mine

[CrashBangWallop]

Supastox Ascari, G2 Brushed 4cell

[neallewis]

Originally Posted by CrashBangWallop

Supastox Ascari, G2 Brushed 4cell

Where did you get your headlight stickers and wing mounts?

I've just cut and mounted my schumacher ascari body, and i'm finding it a bit poor quality, not symmetrical, no overspray film or any marks for the correct window locations.

[Spoolio]

Originally Posted by neallewis

Where did you get your headlight stickers and wing mounts?

I've just cut and mounted my schumacher ascari body, and i'm finding it a bit poor quality, not symmetrical, no overspray film or any marks for the correct window locations.

Aren't the "Schumacher" bodies just Kamtec ones in a Schumacher packet? And they're only £12 (or even cheaper direct from Kamtec) so TBH I reckon the lack of nice bits like overspray film is an acceptable trade off. That being said, I would happily pay another couple of quid for the film as masking off the outside of my Tigra shell was a right pain in the arse.

[mark christopher]

Originally Posted by Spoolio

Aren't the "Schumacher" bodies just Kamtec ones in a Schumacher packet? And they're only £12 (or even cheaper direct from Kamtec) so TBH I reckon the lack of nice bits like overspray film is an acceptable trade off. That being said, I would happily pay another couple of quid for the film as masking off the outside of my Tigra shell was a right pain in the arse.

they are

[Chequered Flag Racing]

Originally Posted by Spoolio

TBH I reckon the lack of nice bits like overspray film is an acceptable trade off.

bit of cling film sorts that out

[CrashBangWallop]

Originally Posted by neallewis

Where did you get your headlight stickers and wing mounts?

I've just cut and mounted my schumacher ascari body, and i'm finding it a bit poor quality, not symmetrical, no overspray film or any marks for the correct window locations.

Headlight stickers were from a HPI Supra 200mm and Wing mounts from the Protoform LMP 200mm.

[Chequered Flag Racing]

not been used as yet

[s22jgs]

Originally Posted by stegger

Here's mine

Is this shell on the legal gt12 list?

[mark christopher]

Looks like It's the ascari shell so yes

[s22jgs]

ok cool.

Shame the mardave TC shell isnt legal, but then i guess its not a TC class.

Ascari shell looks real nice

[stegger]

Steve, yes mate it's the Ascari

[Spoolio]

Here's mine, with a single colour Tigra body although the included window masks don't give the wraparound rear window that a Tigra has (and I couldn't be bothered to mask them out myself ). Been wondering what to do with that can of Camel Yellow for at least 3 years.

[RLGfx]

Here's my plaything...

just waiting for my ESC to arrive, gone for a Hobbywing XeRun 1S.

I'm using a Futaba S9602 from my old 1/12th, and good old servo-tape

[woody_woody]

458174_10151179070249112_775210129_o.jpg why have 1 when you can have 2

[john73]

We need a positive thread on this car.

Here is my new Supastox, just needs electrics installing.





I have been thinking of adding some headlight decals, any feedback is appreciated.

Please add your Supastox photos

Cheers, John

[colin367]

Nice that mate, like the paint. Here's my new one.

[john73]

Very nice, too much work gone into that to race. I would use that as the transport/display shell then have a rattle can shell for racing. Or am i being boring

Are they Mardave V12 rear wheels ?

Are they a direct fit front & rear, shame they don't come with tyres fitted, don't fancy buying the machine to true them.

[colin367]

Hi

Yes they are the mardave rears,their fronts with the bearings/bushes look like 50p when on, they are never truely round. Contacts all round normally for me.

For glued and trued try Kamtec

http://www.kamtec.co.uk/index.php?op...d=48&Itemid=63

Col