Here i have my combo thats no longer used. Its unsensored and I ran it fine in my 2WD X2C for around 6 meetings. It has the 5.5T motor but i have always ran this turned down so it performs like a 7.5T. Plus side of this is motor has never been stressed or over heated. Can unsolder wires in advance if the buyer prefers. Ideal first brushless system with programming option with the included programming card. Looking for £60 delivered recorded royal mail. Paypal preferred or can take along to TORCH one sunday.
SPECIFICATION
- 1.1 Output: Continuous current 60A, burst current 380A.
- 1.2 Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. Note1
- 1.3 BEC Output: 6V/1.5A.
- 1.4 Resistance: 0.00075 Ohm.
- 1.5 Motor Supported: Sensorless Brushless Motor
- 1.6 Suitable Brushless Motor: 5.5T and > 5.5T
- 1.7 Suitable Car: 1/10 on-road or off-road cars / trucks for normal race or sportful race.
- 1.8 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
- 1.9 Weight: 32g(Without wires)
Note1:
- For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
- For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
FEATURES
- 2.1 Compatible with all sonsorless brushless motor.
- 2.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
- 2.3 Excellent start-up, acceleration and linearity features.
- 2.4 With 2 running modes (Racing mode and Forward/Backward mode).
- 2.5 With 4 steps of maximum reverse force adjustment.
- 2.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- 2.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
- 2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
- 2.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.