|
#1
|
||||
|
||||
![]()
Hi all,
Selling up my trusty Etronix Pulse stick transmitter. This is the "pro" version with 3 channels and the black DSSS receiver; fully boxed with instructions. It is in great condition and 100% working. It also comes with some modifications... The best of which is that it runs off an RCLazy Lipo battery which fits perfectly into the battery compartment. The battery isnt that old, and has always been treated very well and never charged at more than 1C (only been charged 4 times I think!) I have also shortened the stick lengths, although I have kept the lower bits should you wish to screw them back on. With the shorter sticks, I found the transmitter felt much better and steering felt more natural and responsive. Looking for £48.50 posted all in. This includes Paypal fees and Royal Mail First Class Recorded (with insurance and tracking) Please note: There are two bits where there is visible wear - one is on the receiver. If you look at the third image below, you will see where the corner of the reciever was melted with a soldering iron, but works 100% without issue. The receiver aerial has also been bent and cracked a bit but works 100%. And finally, the screen on the transmitter has some light scrapes on it and 2 "smudges". Hardly noticeable and does not affect the use of the system at all. Any questions, please feel free to ask. Thanks. ![]() ![]() ![]() |
Thread Tools | |
Display Modes | |
|
|