Any one had trouble with the Hudy set up system giving false readings on the back tow in readings. Set the back end tow as instructions. Put the gauges on the car (xray t3) one side looking from the back of the car the right side showed 3deg the left hand side showed 2deg. The up rights are 1deg both side's the shims are right.
I put a ruler down the side of the wheel this shows that the car is equal on both side's.I'm at a loss, any one got any idea's
PS this is the proper professional all-in one set -up solution been kept in the case when not in use never dropped and very well looked after.
07-01-2012
Hudy set up system
Linear Mode
