b44 locking up when turning

[danny the elfman]

hey guys, ive taken the motor out of my b44 leaving the rest of the leccys in. I turned it on and went to full steering lock. When i pushed it forward still on full lock it was very stiff was hard to push, but in a straight line its fine. Is the answer just to turn the steering down abit or is there something deeper. Thanks

[Shifta]

Check the pins in the front drive shafts are located correctly.. Sometimes they pop out and catch on the hub..

[mpg200]

Mine did that once. Turned out to be worn front CVDs. Check them out if they are all loose and sloppy try a rebuild kit