|
||
|
 |
|
||||||||||||||||||
|
#1
22-12-2011
|
||||
|
||||
7.5 Sp on a HW Xtreme stock?
What are your thoughts on running a 7.5 SP v3 on a HW Xtreme stock esc with no timing/boost etc? will I blow it up??
It'll be carpet in a 4wd btw 
|
|
#2
22-12-2011
|
|||
|
|||
|
I have used an Xtreme stock in a DEX410 with a Novak 7.5 with the V1.0 Mod software without any problem; did not get above 40°C (astroturf, Kampenhout Belgium, summer).
Bur recently I switched over to the V2.1 120A to have a bigger margin. But it did work! 
|
|
#3
22-12-2011
|
|||
|
|||
I ran a SP6.5 with small amount of boost the summer just gone for outdoors and indoors i run a 8.5 with boost indoors no problems at all on same speedo
__________________
CML Distribution / Team Trackside spares 2wd : AE - B6D 4wd :
|
|
#4
22-12-2011
|
||||
|
||||
|
Cheers guys, I'll give it a go!
I will run a fan too and stick some Mod software on it
|
|
#5
22-12-2011
|
|||
|
|||
|
Been watching your x11 build thread with interest Mark. You said in that you will be going down the 10.5t route. Is the 7.5t now going in that or is it for another buggy? If its in the pred then i think it would be fine because of its light weight.
Keep the pics coming
|
|
#6
22-12-2011
|
||||
|
||||
|
7.5 is sat here and I could use it in the X11, but I think this will go in my B44.
10.5 will be a nice safe bet for the X11
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
