|
||
|
 |
|
||||||||||||||||||
|
#2
10-12-2011
|
|||
|
|||
What motor and type of set up are you using (off road/on road - 2wd/4wd?)
__________________
 ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
|
#4
11-12-2011
|
|||
|
|||
|
Ran today on a small half slippy, half carpet sport hall.
A19 0% drag brake/0% dynamic brake Brake strength 95% Brake PWM 8000Hz No boost/top speed timing (blinky stock mode) Punch 70% Forward power 100% Throttle PWN 9600Hz LRP octa wind 8.5 as Tim says, geared 8.6/1 in a durango 410 Very happy, smooth and easy to drive, nice brakes with enough power for the small track. Motor and speedo temps around 130/140degF Looking forward to trying some boost profiles on larger tracks.
|
|
#5
18-12-2011
|
|||
|
|||
|
Setup for a large track half slippy but not too bad, half carpet sport hall.
A19 0% drag brake/0% dynamic brake Brake strength 90% Brake PWM 8000Hz Start RPM 8000 End RPM 24000 Max acc timing 10deg Skew rate 5deg/1000rpm Max top speed timing 5deg Punch 90% Forward power 100% Throttle PWN 9600Hz LRP octa wind 8.5 , geared 8.6/1 in a durango 410 Again easy to drive, enough top end and power for the long straight, just. Speedo temps around 140deg Motor temps around 160deg
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
