|
||
|
 |
|
||||||||||||||||||
|
#1
14-05-2008
|
||||
|
||||
Front MIP CVD
Hi Racer
 when i´am running on Astroturf or on Carpet, with on- way in the front.My Front MiP CVD tent to break, after a few heats is it possible ....????
__________________
Team KBracing Konrad Berger Denmark  Push the limits of PERFORMANCE withTeam KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio. 
|
|
#3
14-05-2008
|
|||
|
|||
|
Which part of the CVD is breaking, the bone or the stub-axle?
|
|
#5
14-05-2008
|
||||
|
||||
|
Dude, that font is super hard to read!
__________________
 Nortech is ACE!
|
|
#6
14-05-2008
|
||||
|
||||
|
Not for me, I have taken thee out so far .....
__________________
Team KBracing Konrad Berger Denmark Push the limits of PERFORMANCE withTeam KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio.
|
|
#7
14-05-2008
|
||||
|
||||
|
I think i have done 6 front stub axles now.
 I dont know what to do to solve the problem?
__________________
Schumacher Racing - Reedy - Schelle - TKR - Bandicoot Bodies - MIP - Nextlevelrc - Trishbits - Moss Models
|
|
#8
14-05-2008
|
|||
|
|||
|
I've been through some recently too, I'm not sure if MIP has had a bad batch or material change, but they're not as strong as they used to be
All the shaft drive cars that use the Losi style stub axle seem to be suffering from this recently. Nothing that can be done really other than not running the one-way and hoping MIP get their act togeather 
|
|
#10
15-05-2008
|
||||
|
||||
|
Where are people getting their replacements for the stub axles?
I couldn't find any anywhere so i ended up putting the B44 CVD's which seem to fit fine, but would still rather have the original ones on. cheers craig
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk
|
|
#11
15-05-2008
|
||||
|
||||
|
Hi craig
 Do the B44 hold better, then the original ones ..... ????
__________________
Team KBracing Konrad Berger Denmark Push the limits of PERFORMANCE withTeam KBRacing MCD W5XL RN Tuning / R1 29ccm. Nano-tech Lipos. ST. JX servo. TH. JX servo. Sanwa MT-44 Radio.
|
|
#12
15-05-2008
|
||||
|
||||
|
If you mean are they stronger than the bj4 ones, i dont know for sure really, not broken one yet!!
I don't use the one-way and i'd run the original axles for about 2 years so i think they just broke through fatigue! could also of been related to a crash i had which shattered an outdrive. There are slight rub marks on the b44 ones as they are a different design but they dont seem to bind so i guess its from bits of grit! Can always fit the B44 hub carriers and knuckles anyway!
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk
|
|
#13
20-05-2008
|
||||
|
||||
|
Quote:
|
|
#14
20-05-2008
|
||||
|
||||
|
Rub marks are on the stub axle part of the joint, just were they are rounded down to the axle!
It's only been some slight rub marks and they haven't got any worse so i reckon it was just grit!
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk
|
 |
| Thread Tools | |
| Display Modes | |
|
|
JConcepts
Linear Mode
