|
#1
|
||||
|
||||
![]()
As title,
I have a Novak GTX esc that up until recently worked ok. Now I have no brakes at all despite several attempts to set the drag and braking force parameters. I have also changed the power capacitor but still no brakes. Any advice would be most welcome :-) Si
__________________
Xray X12 Atom SS GT Supastox TLR 22 Mi3.5 Mi5 Mad monkey, Tamiya Monster Beetle/Mud Blaster "if i'm not racing... i'm dreaming of racing" ![]() |
#2
|
||||
|
||||
![]()
has it over heated? what are the brushes and comm like on the motor ?
__________________
|
#3
|
||||
|
||||
![]()
It's a Novak gtx I had about 3 and all of them lost brakes, its a fet in the speedo that has blown up for sum reason. I don't no if you can send them off but I ran mine for ages without brakes then the forward fet blow aswell so I chucked it into the bin.
__________________
Schumacher - Fantom - Nosram - Sorex - Contact |
#4
|
||||
|
||||
![]()
just make sure you havent changed any settings on your tx by mistake
most brushed speedo lose brakes if inadvertantly reverse connected f even if only briefly forward is usually ok im sure derek bailey still repairs them fid |
#5
|
||||
|
||||
![]()
Cheers guys,
any details on Mr Bailey? if its a cheap (ish) repair i'll consider it. Thanks Si
__________________
Xray X12 Atom SS GT Supastox TLR 22 Mi3.5 Mi5 Mad monkey, Tamiya Monster Beetle/Mud Blaster "if i'm not racing... i'm dreaming of racing" ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|