|
#1
|
||||
|
||||
![]()
Guys,
I've got a shed load of spares that I no longer need for the RC10B2/B3. All items listed with part numbers are new in packet as per picture. Serious offers only please for the lot. May consider a trade on a Losi 22. Front B3 wishbones 9107 x5 Rear B2 wishbones 9255 x5 Rear B2 cf wishbone 9256 x1 B2/3 Diff Gear 9365 x6 B2/3 Rear inner hinge pin 9260 x3 B2/3 Bellcrank pins 9160 B2/3 Front inner hinge pin 9110 x1 B2/3 Front Cross brace 9120 x2 B2/3 Idler gear 9365 x2 B3 kingpin ball end 7211 x2 B2/3 Diff rebuild kit 9351 x1 B2/3 T Nut & thrust bolt 6575 x1 B2/3 diff drive rings 9367 x1 B2/3 servo saver tube/spg 9158 x1 B2/3 Drag link 9165 x2 T3 front axle 7221 x1 B2/3 diff thrust washers 6573 x1 B2/3 gearbox long screws 6928 x1 B2/3 spur gear screws 6968 x3 B2/3 transmission brace 9381 x1 B2/3 trinity b kinwald trans brace B2/3 front bumper 9220 x1 B2 rear hub 0 degree 7365 x2 B3 30 deg ft castr blk 7210 x2 B2 ft 25 deg castor blk 6215 x2 B2/3 RPM 3 degree R mounts B2/3 2 degree R mounts 9266 x1 B2/3 3 degree R mounts 9267 x2 B3 front steering block 7220 x2 B3 0 degree rear hub 7366 x1 B3 1.5 degree rear hub 6366 x1 B2/3 servo saver 9155 x1 B2/3 front bulkhead 9125 x 5 B2/3 gearbox case 9352 x2 B2/3 front top plate 9130 x2 B2/3 rear shock tower 9270 x1 B2/3 front shock tower 9140 x1 B2/3 batt hold down 9230 x1 B2/3 batt hold down short x1 B2/3 clutch disc 6585 x2 B2/3 81t 48dp spur gear x3 B2/3 83t 48dp spur gear x1 B2/3 Hydra drive longer layshaft x1 B2/3 Right diff outdrive hub 9375 x2 B2/3 Left diff outdrive hub 9370 x2 B2/3 Front kick up plate 6296 x1 B2/3 gear cover 9247 x1 B2/3 rear chassis plate x1 B2 Rear wheels 9490 x3 B2 Front wheels 9481 x2 B2 3 part front wheels Rpm B2 hydra drive gr cover x1 Rpm B2 gear cover x1 Roll pins 6375 x1 Complete B2 gearbox, slipper and blue motor and chassis plate Front end with purple chassis plate with no wishbones attached Various bits out of packets such as b2 and b3 rear shock towers, purple motor plate used, black motor plate black, front bulkhead, standard kit uj set, mip uj spares, 2 layshafts, 1 idler gear, set of mip rear axles, 2 diff gears, 2 gearboxes empty, rear transmission brace x2, several rear pivot blocks, front knuckle arms, bumper x2, b3 blue front axles and castor block plus knuckle arms. 4 rear wishbones
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
Thread Tools | |
Display Modes | |
|
|