Mardave 1/12th CE circuit car 13.5 help ????

[Vinster]

Got my self a mardave 1/12th CE circuit car

Im running the Fusion Exceed Sport esc with aformentioned 13.5

Im using the 70mm spur and 25 pinion with 50mm tyres this gives a rollout of 57 mm , on my 1/12th pan car I would expect to run approx 72mm rollout so would need a 31 tooth pinion does that sound right to you.
I have no experience with the Mardave also looking for some guidane on the Esc settings.

Can any one give some guidance advice with any of the above.

[Paulnuneaton]

Try www.rccircuitcars.com massive Mardave section and the guy to speak to there is gazza james im sure they will help you out mate

[Karl Dransfield]

Originally Posted by Vinster

Got my self a mardave 1/12th CE circuit car

Im running the Fusion Exceed Sport esc with aformentioned 13.5

Im using the 70mm spur and 25 pinion with 50mm tyres this gives a rollout of 57 mm , on my 1/12th pan car I would expect to run approx 72mm rollout so would need a 31 tooth pinion does that sound right to you.
I have no experience with the Mardave also looking for some guidane on the Esc settings.

Can any one give some guidance advice with any of the above.

Rollout wise, you're looking for about 65-70 mmpr in blinky 13.5. Hope this helps.