Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 23-11-2011
grovehead grovehead is offline
Member
 
Join Date: Jan 2009
Location: LEIGH
Posts: 182
Default lipo batterys on a budjet

hi im not new to electric 1/10th buggys but i am new to brushless and lipos ,

ive just bought a lrp 9.5 brushless system for my b3 and would like to get some lipos , but not knowing much about them id like some advice please .

ive food these on the bay http://www.ebay.co.uk/itm/2208872325...84.m1423.l2649 and would like to know if they are any good for the money , as far as my budjet goes i could problably buy 2 of these . are they ok for the money ?

cheers lee
Reply With Quote
  #2  
Old 23-11-2011
grovehead grovehead is offline
Member
 
Join Date: Jan 2009
Location: LEIGH
Posts: 182
Default

also what style charger lead would i need to charge it , i have a core ucd 20 style charger..

sorry just decieded to have a look at my charger and it seems i dont need a charge lead may bad
Reply With Quote
  #3  
Old 25-11-2011
BeachBuggyPhil BeachBuggyPhil is offline
Senior Member
 
Join Date: May 2011
Posts: 488
Default

For the money they are ok. Look after them, balance them, store them correctly and they will do ok. But like most things the more you pay the better.
I run two sets of those but 5000mah and they do me fine, not crashing so much is far more important on lap times where I'm concerned! If you want to use them for bashing around then obviously the more mah rating the better.
Check with your local club if thy are allowed at your club if you intend racing with them.
I have nano techs now but still use my normal Turnigy batteries. I only notice a little less punch due to the lower c rating.
Reply With Quote
  #4  
Old 26-11-2011
quincey quincey is offline
Senior Member
 
Join Date: Nov 2007
Location: hawarden.....
Posts: 433
Default

I've used the overlander 5200 25c lipos all year with no problems and I cannot tell any difference between them and a pack of nosram 5300 race lipos- or it might just be me!..£35 a pack and no silly side exit lead to deal with just standard lead fitting as per lrp/ nosram
__________________
Mugen mbx6eco....
Mardave Cobra TQ.....IconicRc edition
PB Mini Mustang......Been in the shed edition
and 65 other pre 1998 iconic rc cars....

Nosram Novak Orion lrp Reedy Turnigy Futaba Schumacher proline

ACTIVE SCALE MODELS.CO.UK........better than some other model shop's ive been too...
Reply With Quote
  #5  
Old 26-11-2011
Kirby's Avatar
Kirby Kirby is offline
Member
 
Join Date: Aug 2009
Location: Larne, Northern Ireland
Posts: 64
Send a message via MSN to Kirby
Default

You could try picking up a used but good quality lipo. Found this one on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.d...#ht_500wt_1202
__________________
Schumacher Mi4LP - Speed Passion V2.1 ProStock, Speed Passion V3.0, Futaba 3GR 2.4ghz, Savox SC1251MG Low Profile, GM V-Maxx 5400 50C, TiR Screws, TiR Layshaft, Ti Turnbuckles.

Sponsors - Schumacher, Gingapaint, Lite Modz
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com