|
#1
|
||||
|
||||
![]()
My 210 is box standard including the shock mount screws. It's a real pain changing the shock position on the shock towers.
On durango's site they have two optional shock mounts (front and rear): http://www.team-durango.com/part-inf...artNo=TD330032 http://www.team-durango.com/part-inf...artNo=TD330031 Only the rear is listed as a spare part for the 210 so I guess this can be used on the front as well as the bushings are the same? Can anyone confirm which ones i need before i order please? Thanks ![]() |
#2
|
||||
|
||||
![]()
You will only need the rear ones for both front and rear.
The ones that are listed as fronts were for the 410 that had skinny shocks, since the big bores were released rear stand offs were used all round HTH |
#3
|
||||
|
||||
![]()
you need 4 of the long ones (for the dex410 rear)
You beat me to it! |
#4
|
||||
|
||||
![]()
simple and worthwhile update. I've done this to mine.
|
#5
|
||||
|
||||
![]()
Do you still have the little plastic ball in the cap?
I have a couple of extras and tried fitting them but seems like I need to shave a mm or 2 with a drill bit on the inside to get the shaft thru. Big G could you do a pic? |
#6
|
|||
|
|||
![]()
These are the parts you need to change to the 410 type mounts
2x http://www.team-durango.com/search.p...chTerms=330032 1x http://www.team-durango.com/part-inf...artNo=TD330036 |
![]() |
Thread Tools | |
Display Modes | |
|
|