|
#1
|
||||
|
||||
![]()
my pred has never lost drive to the rear gear box before but its completely lost it now.
i checked the shaft and it looks to have lost a rather large amount of ali where the pinion gear fits. could this be the cause of my problem? ![]() ![]()
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. ![]() www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
#2
|
||||
|
||||
![]()
Wear to the rear coupling on the main shaft is more than likely the cause of your problem. Have you been running on high grip surface and being heavy on the brakes/acceleration?
It is possible to remove the rear coupling from the shaft and replace by heating it gently with a blow torch. Be careful as too much heat will cause the fibres in the shaft to delaminate and twist, it's a simp job just take your time.
__________________
Lets Off Road! |
![]() |
Thread Tools | |
Display Modes | |
|
|