FOR SALE Brushless motors..

[Rootz]

Hi Guys,

Here we have 6 motors to suit on or off-road. Anything from a 1:14 scale Carisma GT14 to a monster truck. They're all in very good condition. None of them run more than once. Never in competition and often brand new. All prices are including P&P 1st class next day via PayPal but NOT via GIFT.

First up, a Castle Creations CM26-4600CM. Described by Castle as a "Limited edition extreme 1/18 scale motor" and usually packaged with the Mamba Micro Pro ESC. SOLD



Next we have a Castle Creations CM20-9600 KV. Deceptively small but packs a big punch! £30 REDUCED £25



A very similar motor from Dynamite. The Fuze DYN3732 9300 KV. £25 REDUCED £20



I have a range of pinions with 2mm shaft holes, to fit the above two motors. Buy the CM20 and the Fuze and I'll throw in the pinions.

Next, something a tad bigger: A HobbyWing Xerun-4168SL. A decent-sized 2250KV sensorless motor made for monster trucks but, in my opinion, much more fun fitted to a something like a short course truck or a 1/8 buggy. £50



Up next we have a Traxxas Velineon ( Gawd! I wish they'd stop using silly names like Velineon and Xcelorin! ) 380 TRX3371. Designed for vehicles based on the Mini E-Revo ( MERV ) chassis but this baby will make anything under 10th scale go like a scalded cat! The mark on the can was made when I tried to fit it into my Recoil chassis. £40 REDUCED £35



Finally there's the Big Daddy. A HobbyKing KB45-08XL 1600KV. This motor is for serious monster truck or 1/5 scale drivers. It'll put out over 3.5KW. That's the best part of 4hp! The only hitch with this motor is that it comes with a 6mm shaft, which makes finding pinions challenging. I've ground this one down to 5mm which makes it near perfect. It's not the lightest of motors but BOY does it have some grunt! SOLD



Just look at the reviews!

http://www.hobbyking.com/hobbyking/s...idProduct=4937

Oh! And here's a pic to show the relative sizes, so you get the idea.



Shoot me a PM if you have any questions.

Cheers!

Rtz