|
#1
|
|||
|
|||
![]()
ok, first outing out with my newly recieved novak gtb replacement and the fans shagged #(must have caught on something)
ive been running it in 4wd, but was wondering if i put it in my b4 (running 6.5 motor) will it be alright without a fan, at least untill i get anouther thanks dan |
#2
|
||||
|
||||
![]()
You`ll be fine with the 6.5R and the GTB without the fan in the B4
![]() ![]()
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm ![]() AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#3
|
|||
|
|||
![]()
that is what i was hoping, thanks for the quick response
![]() |
#4
|
||||
|
||||
![]()
No problem... glad to be of some help
![]() ![]()
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm ![]() AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#5
|
|||
|
|||
![]()
Dan, i ran a 5.5 in my S4 with no fan on the speedo(NOSRAM) without any probs at Newbury and Caldicot
![]() |
#6
|
|||
|
|||
![]()
will be fine for winter, but on a 30deg summer day you may want one there just for reassurance!
get the muchmoreracing 30mm fan, it spins much faster than the novak and the blades aren't made from glass!!
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#7
|
||||
|
||||
![]()
Novak do some nice 25x25x10mm fans, part no. 5651 for a two pack
|
#8
|
||||
|
||||
![]()
In a B4 I notice a lot of people have a 25mm fan taped to the chassis in front of the speedo to blow air across it, which seems to bullet proof it. I believe both Pidge and Bradders run it this way.
__________________
Nortech is ACE! |
#9
|
|||
|
|||
![]()
great, some things to try there then
cheers |
#10
|
||||
|
||||
![]()
Novak white fan is rubbish, the top falls off the first time you land hard.
IMO not worth risking without a fan at all. Especially given your record Dan ![]() I'd at least do what Danny G says and put a fan in front of the speedo blowing across it. I run a 25x25x10 fan on mine without the little spacers underneath the fan and it moves plenty of air even in my 4wd with a 5.5 |
#11
|
||||
|
||||
![]()
Yeah I did the smaller 25mm fan in front of the speedo, with some vent holes at the back of the 'bump' on the side of the b4 shell.
I tried mounting the normal fan on its side, but it was too big. |
#12
|
|||
|
|||
![]()
good points, i will do the smaller fan on the side thing
I surely was landing it hard on sunday ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|