|
#1
|
|||
|
|||
![]()
Hi i was just looking for a bit of info, ive been out of racing for a while and i have decided to start club racing again i have a Xray t2 007 the question is anyone racing a t2 007 with lipos if so what lipos are being used and was any modifications needed to get them to fit as i have been informed by a stockest that this car is to old to use lipos in.
Any help would be helpful cheers tony |
#2
|
||||
|
||||
![]()
there just trying to get you to buy a new car,best thing to do is check the dimensions of a standard lipo battery and check it will fit,then you can make a lipo mount of your own or buy 1 for another chassis to mod to yours.the car is plenty capable of handling lipos brushless etc.
as for lipos you need a budget do you want to run 1 or 2 lipos for a club night and a compatible charger too. depending on what esc motor your planning on running i average 1800mah(off a 5000mah lipo) using a novak gtb and lrp 10.5t motor takes 30mins to recharge it but i use 2 packs to race with but i would easily get away just using 1 lipo at a club meeting. hope this has helped abit.
__________________
|
![]() |
Thread Tools | |
Display Modes | |
|
|