|
#1
|
||||
|
||||
![]()
What do the ASC7487 REAR ARM MOUNTS 2.5 3.0 3.5 4.0 change setup?
I'm most interested in wet/dry astro and how this might change rear midcorner grip. ![]() |
#2
|
||||
|
||||
![]()
Hey,
Those mounts increase / change the inboard toe-in. The more toe in the more rear grip / the more 'locked-in' the rear of the car is. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
||||
|
||||
![]()
Thanks Mick! Can you also explain what you mean with locked in?
|
#4
|
||||
|
||||
![]()
Hi,
What I mean by 'locked-in' is more traction, rule of thumb, more rear toe-in, more rear traction. But then you can have too much rear traction, that will then stop the car from turning / prevent the rear from rotation through a corner. It's all a matter of getting a balance. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
![]() |
Thread Tools | |
Display Modes | |
|
|