Small Power Supply

[MatJohnson]

Anyone got any good models or advice? I'm after a small in size power supply.

[RickRick]

http://www.ebay.co.uk/itm/DC-12V-6A-...item4aaae69f41

Something like this?
there's quite a few different ones in different power ratings and from different sellers, i've got a 29amp one and it's been great, had it atleast 3 years now, think i paid £30
I chose to modify it, as the connections are made with a strip of screw terminals and i was worried about pulling the wires out, especialy the mains, so i removed the screw strip, soldered wires stright into the board, then tywrapped them tight to the case, put sockets on the end of the outputs, job done

[Chequered Flag Racing]

have the same in 8 amp

put mine in a project box with a small 12v brushless fan and 2+/2- outputs and fitted kettle lead and socket for 240v

[MatJohnson]

How big is it in comprison to a stick transmitter (trying to work out the size )

[RickRick]

my 29amp beast is probably a bit taller than a stick tx, just over half the width and same thickness as a ko stick at a rough guess, so the smaller power ones should be much smaller than a stick tx

[sosidge]

The Much-More Power Master Mini is a nice size. About the same width as my Hyperion charger, a little taller and half the depth. 8A output.

http://www.muchmoreracing.com/index....ex&cPath=39_61

[RickRick]

it's just a bit (ok REALLY) expensive
http://www.ebay.co.uk/itm/DC-12V-10A...item2a12d0db66
£15 deliverd
MM racing £50!

[MatJohnson]

Yeah, them MM ones are nice, but a bit overpriced. Shame really.

[Toon]

I recently bought one of the Much-More Power Master Mini's, and it's a nice bit of kit, although a bit pricey at £50.

However, I've since seen this (http://www.electricwingman.com/junsi...upply-psu.aspx) which is up to 23A output, and for less money! If I'd seen it earlier I'd have got one instead of the MM.

[MatJohnson]

Is that the same as http://www.wheelspinmodels.co.uk/i/88448/ just a different brand?

[imull]

I use one of these: http://www.ebay.co.uk/itm/Dell-Power...item35b46281ad

You need to cut of the connector and link the blue wire to one of the black ones to switch it on and you're laughing.

There are 3 pairs of power wires in the cable, to I fitted 3 pairs of 4mm sockets so that I can attach my charger and soldering iron easily

18A for about 20 quid (including bits from Maplin or the like) Bargain

I can post up photos of the mods if you want?

Ian

[rice98w]

got a nice graupner one for sale in the for sale forum.

smaller than the MM or Nosram/LRP p.supplys. 7 amp output.

pm me for info if wanted. thanks