Making my BRCA LiPo saddles fit in a Yokomo BX.

[Jonathan]

Here are some pictures of how I fitted my Intellect saddle LiPo's from the BRCA approved list.

The terminal locations for the link wire posed a problem as the rear top deck totaly obscured them. This meant a normal link wire would not fit and even if I had made low profile one with 90 degree connections there would have been tricky to insert them / take the cells out for charging.

I made a link from some 4mm connectors and a tube. The cells slot in and out realy easily.

The battery posts also needed spacing up to accomodate the height of the packs.

[JCJC]

10 out of 10, thats is so sweet thanks

[RogerM]

What a great idea! I like that, well done!

[bigred5765]

very tidy,perfect bit of sideways thinking,

[dan_kitty]

nice, are those cells made by umbro?

[Jonathan]

Cheers for the comments.

Regarding the case pattern, a few of the cells seem to have this pattern (Demon, Vampire, IP), so either they come from the same factory, or at least the cases do ?

[stegger]

Good skills with you soldering iron

[Micha_MX4]

similar as Jonathan...