|
#1
|
||||
|
||||
![]()
Noticed at full lock, the inside edge of the front wheels is rubbing against the steering link ball-cup. Its worse with AE wheels and has cut in a little, but even rubs with the kit wheels.
Anyone else had same thing? Even had 1.5mm spacer for front wheels and still did doing it.
__________________
Southport P.R.O. / Photographer of semi-naked girls www.srcc.co.uk - www.craigmagee.co.uk |
#2
|
||||
|
||||
![]()
Yes I had this when I ran AE wheels as well ,I tried some Losi wheels and they were perfect just ream out the hole slightly.
![]() |
#3
|
||||
|
||||
![]()
Yep ,had the same with AE rims, I tried some Losi rims and they were perfect, just had to ream out the centre slightly
![]() |
#4
|
||||
|
||||
![]()
mine rub when I run the rulux wheels, but never to the point of being a problem really. I only just replaced the ball cups with the newer HD ones, but might start using proper TD wheels shortly.
|
![]() |
Thread Tools | |
Display Modes | |
|
|