AE springs for trf201

[guinness]

witch AE springs you are using guys on the trf201? or witch are the best spring to use?
any parts numbers? thanx

[wildwillydriver]

I use and used AE springs on 201 front shocks they works fine, and are just a little bit shorter than Tamiya ones.
On my fronts i used AE brown that are the same as Tamiya brown (2.80 lb/in) and AE Green that are the same as Tamya Yellow (3.50 lb/in) with good results.
Never tested AE springs on rears.

Impossible to say witch spring is best it depends on the track type and condition.

Bye
WWD

[guinness]

are this the one?http://www.jespares.com/component/vi...roduct_id=7223

[wildwillydriver]

Originally Posted by guinness

are this the one?http://www.jespares.com/component/vi...roduct_id=7223

Yes #1581
Good for the green ones even if it don't have the brown ones, mine has them.....

If you have to use them on a TRF201 consider also the original ones, Team AE works but Tamiya seems to work better.

Bye
WWD

[Timee80]

if you use the ae springs on the 201 shocks, use the taller b44 spring cups to make up for the shorter springs

[Ritchie T]

I use silvers on the back and blues up front mainly. They fit on the standard parts just fine.

[guinness]

does tamiya make a full set of springs for buggy or you can only purchase them in pairs?

[fastinfastout]

Originally Posted by wildwillydriver

Yes #1581
Good for the green ones even if it don't have the brown ones, mine has them.....

If you have to use them on a TRF201 consider also the original ones, Team AE works but Tamiya seems to work better.

Bye
WWD

AE springs fit better than tamiya springs