Tekin RS and speed passion 8.5 V3

[Ross]

Can anybody point me to a decent set up on the speedo for this combo.

Ive never played around with the settings until tonight, just running it up and down my road it seems alot faster (not always a good thing ), i took a set up of the tekin web site just to see what difference it would make.

Im running a TLR 22 at MotoArena and Stotfold.

This is a set up for a 22 on a clay track, i know its not what i will be using it on, but i wanted to see what difference it made.

I like the throttle profile at 3 although i may up this a bit. The part that concerns me is the boost and end RPM, i don't know if there set correctly or what difference it will make, is the RPM too high for this motor, ive tried to google the max RPM of the motor but didn't find much.

Thanks

Ross

Boost: 20
Turbo:NA
Turbo Ramp:1, i couldn't set this to 0
Turbo delay: NA
END RPM :30,000
Start RPM:903
Motor type: BL FWD
Voltage cut off: 2s
Drive mode: Sensored only
Motor direction: normal
Throttle profile :50
current limit:85
Drag brake:12
Brake strength :100
Reverse Speed: off
Neutral width: 5
push control: off

[learnerdriver]

trevor coult of chesterfield club has published a beginners guide

might be worth a read

http://www.carsrcracing.co.uk/?p=188#more-188

hope this helps

[Ross]

Originally Posted by learnerdriver

trevor coult of chesterfield club has published a beginners guide

might be worth a read

http://www.carsrcracing.co.uk/?p=188#more-188

hope this helps

Thanks Mr"H". By the way ,your not getting the hot-wire back

[learnerdriver]

there is also a more detailed guide by mark brown of rctech which i may send to you

[Ross]

Originally Posted by learnerdriver

there is also a more detailed guide by mark brown of rctech which i may send to you