|
#1
|
||||
|
||||
![]()
im after some to spray my cars bumper anyone know where i could buy some or possibly have some i could buy off them need about 1/2l
__________________
DO NOT BUY/SELL TO THIS USER. |
#2
|
||||
|
||||
![]()
Half a litre to spray one bumper
![]() |
#3
|
||||
|
||||
![]()
ha well with my luck of late it will be the car :P
__________________
DO NOT BUY/SELL TO THIS USER. |
#4
|
||||
|
||||
![]()
Are you thinking off doing it with rattle cans or a spray gun?
|
#5
|
||||
|
||||
![]()
spray gun i dont think cans would cover
__________________
DO NOT BUY/SELL TO THIS USER. |
#6
|
||||
|
||||
![]()
Is it a new unprimed bumper, if so it will need a few coats of plastic primer otherwise the paint will just shell off. And the colour, assuming its a mettalic would need a few coats of clear coat on top. If you lived near York i could point you in the right directions of a very cheap and good bodyshop
![]() |
#7
|
||||
|
||||
![]() Quote:
__________________
DO NOT BUY/SELL TO THIS USER. |
#8
|
||||
|
||||
![]()
Ive just googled car paint and its brings up loads of suppliers. If your painting it at home I would recommend using a solvent and not a water based, base coat.
|
![]() |
Thread Tools | |
Display Modes | |
|
|