|
#1
|
|||
|
|||
![]()
Hey all, haven't been on in while as been busy with school, work, etc.. but am hopefully goign to uni after summer and as such i won't really be using my touring car for the foreseeable future. So sadly it must go.. along with its spares, accesories, electrics, chargers, dischargers, stand. etc. All is in GREAT CONDITION, apart from a worn shell with a few cracks, and some old batteries, but all still has lots of life left. The rest is MINT CONDITION. All you need to get this running is a transmitter and some mounting screws for the steering servo. Looking for an offer around £230. Plus P+P Or collection from gloucester.
So Here is a list of what i have: -Xray T2'007 rubber wheeled touring car. (With original Box, manuals, set-up sheets and booklet and authenticity sheet). In Great Condition with minimal scratching on the bottom of the carbon chassis. Fitted on the car are Aluminium Steering blocks. -Also On the car is a Team Checkpoint 19 Turn motor, in great condition. -A Novak rooster ESC. (Plus on/off switch) (Plus lead to the batteries as shown) -A Hitec, HFS-03MT, 3 channel FM reciever. -Set of Crystals. (CH89, 40.935) -Savox SC 1258 Coreless Digital Servo. 12kg high torque without any loss of performance. Dimensions 40.3 x 20 x 37.2mm Weight 52.4g Speed sec60degree 0.08 Torque kg cmoz in 12166.6 Gear Titanium and Aluminium Case. -A home made stand for the car. Is made from plastic acrylic and Has an integrated coloured fan with two workign Led's and a metal guard. Also Cork pads so nothing sets scratched and engraved writing on both sides. Also is a plug to power the fan and an output lead that connects straight into the discharger for convenience. -A Team Orion Clubman Lipo Edition Advantage charger. complete in original box with all leads and insturctions. The LiPo edition charger provides you with all the good features of the Clubman, but adds LiPo and A123® charge capability and constant voltage charge mode. Specs are available online through a simple search. -Novak Smart Tray SE, Battery Discharger. In original box with leads a small adapter for the power and clips as shown in the photos. -An AC/DC Power Converter power Supply to power the charger. Unboxed but works fine. -Four 6 Cell batteries for the car. three 4200 and one 4300 Ni-MH Batteries. These are well used but still work fine. all have the right connections for the car. -Some partly used Carpet Jack Odourless tire Additive. -The original box for the Savox servo complete with extra heads and rubber pads etc. -Two Spare Sets of wheels and tyres. One set is Rp White dish wheels with slick tyres and one is spoked white wheels with Schumacher Carpet Dragon tyres and medium foam inserts. On a tyre holder. -also i have two more spare sets of wheels but need the tyres taking off them and new inserts and tyres beign put on. -Some Left over Cell tape on a roll, Along with Two Spare Clear Rear wings for the bodyshell. And a custom made Ride height measurement guage. -A custom painted Bodyshell Done by myself. This is worn but is still useable. I might even have some apre paint for this, but i would have to look it out. (This isn't shwon in the pictures below). For spares i have the following: -6 M2x5 Hex Screws. -A Aluminium wheel Hub -A plastic Front suspension Arm -A right composite Upright Toe in -A left Composite upright toe in -8 3mm Composite Drive Shaft Recplacement Caps -3 composite Schock ball joints. -open -7 5mm composite ball joints -open -A plastic Steern block with 4 bearings - A few odd screws, caps and washers Pictures: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() if you have any questions or want more pictures just ask. Cheers for looking. |
Thread Tools | |
Display Modes | |
|
|