|
#1
|
|||
|
|||
![]()
HI all,
bought a used b4.. im having trouble putting 1 of the front wheels on... ![]() the bearings stuck it wont go any further down.. ive tried swaping bearings but it still wont go on i think i need new Trailing Axles... ive tried jsut forcing it on im not getting any joy.. the pictured trailing axel is the FT so it uses a screw to fix keep the wheel on ive been searching and the normal b4 trailing have a thread in the end i guess for a nut... should i just get that? im gutted i got everything setup and failed at the last step lol.. |
#2
|
||||
|
||||
![]()
Gently get the bearing off and clean up the axle with 1000 grit wet/dry paper (dont take too much off-use the paper wet)
__________________
X-Factory X-6 Cubed |
#3
|
||||
|
||||
![]()
If all your bearings have the same issue then try the wetndry suggestion. Shouldnt take much.
|
#4
|
|||
|
|||
![]()
thanks alot got that sorted
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|