|
#1
|
|||
|
|||
![]()
Hi,
Got a carbon fibre chassis for a mr4bx. There is lots of adhesive residue that I'm having trouble getting off. Some of it has gone quite hard. Any clean suggestions? Regards Naushad |
#2
|
||||
|
||||
![]()
Blast it with a hairdryer and then just scrape it off.
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#3
|
|||
|
|||
![]()
WD40 can work well but you will need to degrease prior to sticking anything back down
![]() |
#4
|
||||
|
||||
![]()
as post two and or
lighter fluid on a rag motor spray on a rag brake pad cleaner on a rag
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#5
|
|||
|
|||
![]()
Thanks for the suggestions guys!!
|
#6
|
||||
|
||||
![]()
nail varnish remover..... you wouldnt believe how much my other half goes through
![]()
__________________
{CML Distribution} {Penguin Bodyshells} ![]() |
#7
|
||||
|
||||
![]()
Isopropyl (or tape head cleaner)
|
#8
|
||||
|
||||
![]()
As already mentioned, just soak the residue in lighter fluid for a few mins. It then just rubs off easily.
Then just mount electrics with the red roll of No More Nails. Sticks good and can easily be removed.
__________________
- Associated B6.1 - - Yokomo YZ CAL3.1 - - JConcepts BJ4WE - - Frankenstein DEX410 - - Schumacher Cougar Classic - - Xray T4 2013- - Tamiya Monster Beetle Black Edition - oOple Trader Feedback |
![]() |
Thread Tools | |
Display Modes | |
|
|