Transmitter help!!

[sfry61]

im trying to set up my tekin rs pro esc with my ko propo esprit 2 tx and the tx doesnt seem to be transmitting the brake function.
Everytime i get to the brake part of the esc setup nothing happens...it's driving me mad
Ive had the tx apart trying to look for obvious faults.
Has anyone got any suggestions

[rc_penguin]

Have you tried reversing the throttle channel then trying to set it? I think it was Scott who had a similar problem and that solved it.

[sfry61]

tried that, all it's done is move the problem to the throttle setting. the tx doesnt seem to work when you pull back of the brake

[ch!3f]

do you have the same problem with any other esc with this transmitter or is it just this 1?

[sfry61]

Originally Posted by ch!3f

do you have the same problem with any other esc with this transmitter or is it just this 1?

Both esc and the tx are new to me. I'm going to test them on some other equipment tomorrow and see what happens

[paulc]

I had the same problem the only problem is now i carn't remember what i did to fix it witch is no help to you !!

Try changing the model number and put the throttle and brake hi points to the max on the transmitter and try setting it up again

[Mad-Wolfie]

i know on my old Futaba, i had a similar problem when trying to set up a speedo & 2 things caused it.. 1) i left the ABS switched on when i should of disabled it & 2) the throttle channel had to be set to reverse.

another possible reason of course is that the brake has been disabled on the ESC settings somewhere.

[sfry61]

Originally Posted by Mad-Wolfie

i know on my old Futaba, i had a similar problem when trying to set up a speedo & 2 things caused it.. 1) i left the ABS switched on when i should of disabled it & 2) the throttle channel had to be set to reverse.

another possible reason of course is that the brake has been disabled on the ESC settings somewhere.

Just checked and the abs is off and ive tried reversing the throttle channel. I was thinking the same with regards to the esc brake settings, besides a faulty tx that's going to be the next thing to check.