stagger rib on dex410

[RWJParkes]

Anyone got any tips for mounting staggered ribs on dex410 wheels.

Do I need to cut off the inner ring plastic of the wheel and leave a 3-4mm gap around the outside of the wheel?

I hope you can help

[sparrow.2]

Mount them like you do on 2wd fronts.

Trim the lip on the outer side of the tyre to get it to seat into the bead on the rim. Mount to rim, glue the outer side and leave the inside as is in the middle bead of the rim.
Finished. No need to cut wheel and they work fine.

[SteveB]

Originally Posted by RWJParkes

Anyone got any tips for mounting staggered ribs on dex410 wheels.

Do I need to cut off the inner ring plastic of the wheel and leave a 3-4mm gap around the outside of the wheel?

I hope you can help

Richard, come and have a look at mine or Dan's on the 4wd cars this Sunday if your racing. Cheers

[RWJParkes]

Originally Posted by SteveB

Richard, come and have a look at mine or Dan's on the 4wd cars this Sunday if your racing. Cheers

Will do, looking forward to been down this weekend. I need some serious practice before the summer season

[simoncrabb]

Or try cut staggers mounted wide with a 4wd insert. They're brilliant!

And we owe you a set Steve, forgot on Sunday!