Losi 22 build help.

[Stotty]

Hey

Iv just started building my 22
Got into a slight problem reading the instruction manuel when it came to putting the front wishbones on.

If you look under section A-13 on page 17 of the manuel there is a little grub screw part number TLR6289. I cant quite figure out where this goes
Does it go in the hole on the wishbone to hold the two pins in ?

Cheers Stotty

[reg]

yes,its to hold the pins in

[ashleyb4]

It screws into the top of the front bulkhead to hold the pins in.

Ash