FOR SALE tamiya 416we and spares

[john_s]

hello i have for sale my tamiya 416we car and spares
I have

1x 54031 4 deg c hubs
1x 54076 axles
1x 54078 44mm sreel driveshafts
1x53502 42mm alloy driveshafts
1x 53851 46mm hingepins
1x 50994 5mm suspension balls
1x 54143 416 front belt
1x 53574 damper guide and o ring set
1x 54174 seperate suspension mounts (1c)
1x 51341 diff screw and nut
1x 51332 steering knuckles
1x 54075 flourine coated king pins
1x 53334 low friction damper parts
1x 53918 trf damper parts
1x 50594 2x10 shaft

the following yeah racing pivot blocks. 1xd, 1xd, 1e in packet
the following loose tamiya pivot blocks. New style 1c, 1d, 1d, 1e Old style 1b, 1d, 1d, 1xa
also alot of various other spares like 2 front graphite wishbones 1 rear graphite wishbone 2 steel 46mm driveshafts 1 alloy 46mm driveshaft 244 mm alloy driveshafts 1 litemodz spool 1 tamiya spool a fron oneway a full set of outer hinge pins steering knuckles pivot block shims and various other parts.
The car has the normal scratches underneath and is as kit other than 46mm steel front driveshafts and torx head titanium screws in the topdeck. (i can supply a t10 torx driver if you wish) The car has 1 missing turnbuckle that i missplaced while rebuilding my car. it has been replaced with a longer turnbuckle to hold the car together but will need replaced before using. You can get a pair of tamiya 32mm turnbuckles to replace this lost one for only £4.40. Please note there are a lot of spares in the plastic bag pictured that are not on this list as it would take to long to list them all. And also the car will come with tamiya springs fitted and not the ones pictured

I would like £140 posted for this as i am after a quick sale to fund my racing costs