Spraying liquid mask. RCS

[The Chef]

How many coat's would you use when you spray RDS liquid mask? And how long would you leave it to dry between coats? Could I use a cheap paint gun to spray the mask on say 1.7mm nozzle? Then spray through with plenty of water right?

Thank you in advance

[jonmiller]

I normally do around 4-5 light coats. That spraygun should be fine. I tend to thin the mask about 10% with water for even smoother application. Drying times can be reduced with a hairdryer or similar, heater etc.

[jonmiller]

Yes, clean the gun with water afterwards.

[The Chef]

THANK YOU.