|
#1
|
||||
|
||||
![]()
Hi again guys
Having just about finished my B44 im moving onto the B4 FT Id like to use the GTB Novak again - will it fit without fouling the body ? Has anyone got some pro wiring pictures of a completed B4 FT Thanks ! |
#2
|
||||
|
||||
![]()
it fits but i would recommend velcroing the shell to the chassis as ther is a slight raise,but dont worry take the fan of the top,it doesnt need it in 2wd drive
running gtb 7.5 and just touches the shell, as you know the gtb wires are about 67 miles long! so i would suggest cutting the motor wires and re-soldering,i can post pics if need be?
__________________
ITS COLIN!! D4 B4 Tekin FX-R Peak Spashett 9 x 2 Eden Park Raceway Fro0b Racing |
#3
|
||||
|
||||
![]()
Here's a B4 with a GTB installed.
(I think that it's Wookies from RC10b4.com) MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#4
|
||||
|
||||
![]()
ooh so thats where that black power cap goes!!mines just dangling like my balls!!ha ha
__________________
ITS COLIN!! D4 B4 Tekin FX-R Peak Spashett 9 x 2 Eden Park Raceway Fro0b Racing |
#5
|
||||
|
||||
![]()
Thanks a lot guys thats just what i was after
![]() Feel free to post pics up - the more the merrier as id like to get it right first time Cheers |
#6
|
||||
|
||||
![]()
think thats pretty much the neatest install you can have mines that except the fan and the power cap is just floating above the battery strap,go for that mate
__________________
ITS COLIN!! D4 B4 Tekin FX-R Peak Spashett 9 x 2 Eden Park Raceway Fro0b Racing |
#7
|
||||
|
||||
![]()
Cheers Mart appreciated. Was it you who was after some alu shock caps ?
if you still want some then i have a set NIB that im now not using. Cheers |
#8
|
||||
|
||||
![]()
On mine i do not have the fan on becasue if you have geared it right then it wouldn't over-heat and I normally wouldn't run one in 2wd anyway. The power cap is placed in that little compartment beheind the speedo and is held in place with a little bit of double sided. It isn't the neatest thing in the world but it works.
![]()
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
#9
|
||||
|
||||
![]()
tried that but my shell doesnt fit,!?might have to re solder longer wires onto the power cap for it to reach round as turning the gtb means my red positive lead is to short to reach,also all the connection side is on the outside and i dont really want it there as it mght be prone to water,dirt or damage?
legend please post pic of how yours is placed someone sorted me with blue alloy caps rich d,but thanks for remembering cheers all
__________________
ITS COLIN!! D4 B4 Tekin FX-R Peak Spashett 9 x 2 Eden Park Raceway Fro0b Racing |
![]() |
Thread Tools | |
Display Modes | |
|
|