|
#1
|
||||
|
||||
![]()
Guys,
I've designed some parts I need to get machined out of aluminium fairly quickly as part of a touring car chassis conversion I'm working on, unfortunately the chap who was making them has been struck down with a vicious illness so can't finish them off. Can anyone recommend anywhere that might be able to make these up within a fairly tight timescale? I need to get them on the car in the next fortnight so I can make sure they work with the carbon fibre chassis plate and top deck I've already had cut and am testing at the moment. Thanks!!! |
#2
|
||||
|
||||
![]()
P.M me with details or images as to roughly what your looking for and ill see if we can help out.
|
#3
|
|||
|
|||
![]()
...and if he cant help i'll have a look...
|
#4
|
||||
|
||||
![]()
If anyone wants to see what I need to have made have a look at;
http://www.akularacing.co.uk/akula-products/ There are some CAD screenshots of the three parts I need manufacturing along with some photos of the rest of the conversion. If anyone can help either PM me or e-mail [email protected] |
#5
|
||||
|
||||
![]()
Hi guys,
I'm looking for essentially the same thing as the OP. I would like to get four parts made out of aluminium for a M-chassis conversion of my own design (2 for the motor mount/transmission housing, 2 for the rear suspension components). Everything else on the car is either original Tamiya parts or simple fibreglass plate. Do you guys know of anyone who can offer such a service? Cheers Joe (P.S. First time poster, bit nervous, etc etc ![]() |
#6
|
|||
|
|||
![]()
you have a pm!
|
![]() |
Thread Tools | |
Display Modes | |
|
|