|
#1
|
|||
|
|||
![]()
i have built and run in my buggy and yet the front suspension is still not returning up but yet back is spot on
![]() i have checked oil in shocks,all the settings as per stock set up and yet still not returning ![]() any suggestions would be grateful as supposed to be racing sunday ![]() |
#2
|
||||
|
||||
![]()
build them with some pre load
watch clip on youtube adam drake building shocks cant remeber link |
#3
|
|||
|
|||
![]()
nothing to do with the shocks, it'll be the caps on the pivot ball's in the front hub, slacken them of a smidge and you'll be right.
|
#4
|
|||
|
|||
![]()
make sure the pistons arent over tightened as well can make the shocks bind, but as stated also the pivot balls can do it as well, I take it you made sure everything dropped under its own weight on the arms side of things when building.
|
#5
|
|||
|
|||
![]()
yeh when building with out shocks and when removed shock to check it dopped fine
|
#6
|
|||
|
|||
![]()
shock oil could be too thick but difficult to sey without seeing it
__________________
nemo racing- agama- smd |
![]() |
Thread Tools | |
Display Modes | |
|
|