Starter box problem

[tellor]

Hi All,
I have a starter box problem. When pressing down on the box the connection that makes the circuit shorts out. Now the starter box doesn't work
I have disconnected the motors and have looked for a short but can’t see any obvious. No wiring is shorting on the starter box nor touching the motors. I am thinking the motors have given up, I have checked using a meter but they appear to be ok

The Lipos are both OK even though there is no fuse in the system (might put one in now)

Help!!!!!!!!!!!

[jaffacake]

Which box is it?
Bypass the switch for a start,often the weak link in any starter box
Obvious also is do away with Tamiya connectors.

[tellor]

Its the SMD starter box

I bypassed the switch, (it wouldn't cause a short anyway, well not between each other)

There are not connectors on it, the wiring just plugs straight into the lipos

I just wondered if anyone had had similiar problems

[wrighty]

Pull tbe plunger switch out your probably find its melted

[jaffacake]

Well you obviously know more than i do so best of luck