Aerial Fixing in b4.1

[Tempest501]

Hi Guys,

I bought a new LRP TX and RX with more adjustable settings as wanted to tone down the power for indoors as was finding difficult to control. Anyway got all the gear in fine and was pleasantly surprised to find the Aerial is about a 1/5 of the original one.

Anyway have cut the tube down now so its sits within the body and looks really good.

My question was have any of you guys found a better way to secure the aerial as mine keep coming loose. The little grub screw just doesn't seem to work very well.

Thanks in advance.

[Richard Lowe]

I put a tiny dab of superglue on the tube if I need an aerial to stay put. Or if you cut the tube a little short and fold 5mm or so of the aerial back down before you put the rubber on the top that should keep it in place

[Tempest501]

Good Idea, ill give it a shot with a dab of glue should be easy enough to get off if its a tiny bit.