Hobbywing 1S ESC (No RX Pack needed)

[Hobbywing UK]

We are proud to announce that the 1S ESC has arrived and is in stock with our importer and is arriving at retailers as we speak.

Its finally arrived a useable Brushless 1s ESC for 1/12th, 1/10th Pan Car and F1 cars. Doing away with the need for a separate receiver pack with a small footprint and ample power available for motors down to 2.5 Turns. The ESC is able to cope with both 1s and 2s applications with 120amp constant current capability and 6v receiver output, its just what racers the world over have been waiting for.

This is the BLACK edition.

Features

-Built-in step up DC/DC converter (D C/DC booster).Perfectly Works with 1-2 Lipo cells, so the single cell class racing are easily covered by this XERUN 120A-1S without an additional receiver battery
-Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, etc.
-Seamlessly change to sEnsorless working mode when the sensor cable is broken.
-Excellent start-up, acceleration and linearity features
-Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
-User programmable .Easily programmed with the “SET” button on the ESC and also compatible with the Digital LED Program -Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, forward /Reverse mode. Rock Crawler mode)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment
9 start modes (Also called “Punch”) from “very soft (Level 1) to “very aggressive (Level 9)”
8 steps of timing adjustment to suitable for all brushless motors
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection/ Motor blocked protection
Product Details
-Cont./Burst current :120A/760A
-Suitable Car:1/10,1/12 on-road @off-road car for competition,1/8,1/10 rock crawler
-Motor type: Sensored and sensorless Brushless Motors
-Suitable Motor:3-4 NIMH or 1 Lipo ≥2.5T(1/12 on-road)
5-6NIMH or 2 LIpo ≥3.5T(1/10 ON-road) ≥5.5T(1/10 off-road)
-Battery:3-6cells NIMH or 1-2S Li-po
-BEC Output:6V@2A Built-in BEC with step-up DC/DC booster for 1 cell Lipo racing

-Dimension:43mm(L)*36mm(w)*33mm(H)
-Weight:105g
-Fan Working Voltage:,maximum 8.4v()The fan gets the power supply directly from the battery



Some stores with Stock in place.


http://www.racersinexile.org.uk/XERU..._2127148.aspx#

http://www.pit-bitz.com/product_info...roducts_id=768

http://www.xtreme-rc.org.uk/catalog/...roducts_id=587

[Matisse]

Looks good!

as an aside, are there plans to see the 1/18th scale esc's on sale in the uk?

they are on there way to being the no1 choice of esc in the micro section, be good to see a competitive uk supplier.