pred x10 ready to run (top end gear!)

[Aaran]

Just testing the water. one of my cars has to go (either my alloy 1/5th or this)

anyway quick spec;

pred x10 xrs
has alloy front rockers, a selection of front tamiya tc springs (these fit the x10 shocks great)
quite a few spares (1 of each arm, 2 packs of bud drive pins, x11 spur gear, rockers, few drive cups, quite a bit more and 90% are new in packet, enough to replace most bits if you had to)

car has been converted to take a normal lipo stick pack with a custom made battery strap made of thick lexan, steering system has been moved over to the left hand side of the car (beats using lipo saddes)

2 body shells

installed in the car is;

nosram pearl 4.5 turn sensored brushless motor
Nosram matrix evolution istc esc+fan
Ace ds1015 high speed high torque steering servo
spekky sr3000 reciver
running a brand new orion 4600mah lipo carbon battery (45c) has been charged 4 times max and always balanced charged! (only added this a few weeks ago)

you jsut need a transmitter and away you go!

bad points; needs a screw in the motor mount. diffs are getting noisey so will be needing rebuilding at some point with new plates and possibly new balls. carbon center drive shaft has some very light damage near the spur gear (looks like someone had held it with pliers at some point and scored the shaft, been fine for the 3 months i have has this as the shaft is massivly thick and plenty strong, just looks displeasing lol) mini pin tyres i had on it are very very worn, will need a new set

car comes in original box+instruction book.
i have the box+instructions for the esc
also the box for the carbon lipo.

Utter bargin and give away at £430 incl postage!!

i will NOT SPLIT any of this so please dont ask. (sorry i will ignore pm's asking how much x is or the roller, i need it all gone in one hit)

can be collected for a reduction from me here in horncastle lincs






























cheers