Go Back   oOple.com Forums > General > Vintage RC

Reply
 
Thread Tools Display Modes
  #1  
Old 07-10-2010
stevemardave's Avatar
stevemardave stevemardave is offline
Member
 
Join Date: Apr 2010
Posts: 64
Question losi xx setup?

i just got myself a standard losi xx 2wd,i want to race it on asotruff but not sure on setups. any advice would be helpful. thanks steve D
Reply With Quote
  #2  
Old 07-10-2010
liam's Avatar
liam liam is offline
Member
 
Join Date: Apr 2010
Location: newport
Posts: 293
Default

hello bud!

i run a xx as my main car and its great!

So far the victims i have claimed are:

cougar sv
atomic carbon cr2
losi xxx cr
x factory x-6 x 2
too many b4's to list!

If you need any set up info PM me your email addy...ive got Brian Kinwalds set up tips, which help alot

Its a really good car to drive and you dont really need to change it often to get it to run great

cheers

liam
Reply With Quote
  #3  
Old 07-10-2010
stevemardave's Avatar
stevemardave stevemardave is offline
Member
 
Join Date: Apr 2010
Posts: 64
Default

the main setups i need is shock oils,toe and camber settings and gearing for losi 8.5 motor ?

cheers

steve d
Reply With Quote
  #4  
Old 11-10-2010
Nick Goodall's Avatar
Nick Goodall Nick Goodall is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Sep 2006
Location: Newbury, Berkshire
Posts: 2,161
Default

Losi XX used to work everywhere with one simple setup!

Front - 35Wt Oil, 556 Pistons (Drilled out Red pistons, 2 holes same as orange), Blue Springs (Green or Silver if you needed a tad more steering)

Rear - 30Wt Oil, 556 Pistons (as above), Pink springs.

Do you know which car it is you have? If it's the CR rear end you want to run the shocks on the inner hole of the rear wishbone, middle of the tower. If it's the older rear-end (With outboard toe-in) we used to modify the wishbones by drilling a further two holes outward to the standard 3 you used to have.....

Fron was always outside hole of the front wishbone, and middle or inner of the tower (again depending if you have the 2 or 3 holes in the top).
Reply With Quote
  #5  
Old 12-10-2010
DerbyDan's Avatar
DerbyDan DerbyDan is offline
Senior Member
 
Join Date: May 2009
Location: Northants
Posts: 637
Default

Good memory Nick.... it was a simple formula but always worked well, even indoors - I generally ran green springs on the front.

A better car in my opinion than the XXX that replaced it, which was just as safe/easy to drive but lacked the precision & steering of its predecessor.
Reply With Quote
  #6  
Old 12-10-2010
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

That's pretty much what I run in mine at TORCH.

What track are you going to be racing it at?
Reply With Quote
  #7  
Old 14-10-2010
stevemardave's Avatar
stevemardave stevemardave is offline
Member
 
Join Date: Apr 2010
Posts: 64
Default

i beleive its a standard xx NOT cr, i be running at eden park ashtro track
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com