nosram matrix istc settings

[Aaran]

does anyone with this esc know what the power profies do?

normay i have the car set at default so i thought i woud try setting 1 on my brushess 4.5turn motor (thats smooth 1) and its insane. is it the lower the number the more juice it puts to the motor?

[jim76]

do you not have the instructions? if not then have a look on the nosram website and you can hopefully download a set

[ian h]

I just got one of these but haven't had chance to run it yet. From what I can tell from the manual 1 is the smoothest. The overall power output could be the same at all settings it is just the manner it is delivered that is different. Might be wrong but that's how I understand it.

[jim76]

if it's in a buggy then the problem is probably the fact that a 4.5 is insane for offroad, not the speedo at fault!

[samd]

1- lots of current limit
2- med curent limit
3- low current limit
4- no current limit
5 onwards starts to add electronic motor timing advance

higher numbers also add more aggressive throttle response, I use 1-4 for off road or you may start cooking motors (I have)

Hope this helps - SAM

[Aaran]

thnaks. it does seem to run alot better on profile 1 though. (them again im ony using nimh saddles and not lipo atm so im guessing the current/amps is being drawn on the higher settings is not being provided by them?)

the car is perfecty drivable with the 4.5, gotta love the pred for being so planted, really woth the asking price they have even if the parts are pricey and the car is more on the fragie side runs on our clay track no problems

so with it having a lower current limit my run times shoud be longer correct?