Novak GTB X-6 install

[Chris Elworthy]

I finally got my X-6 the other day but am struggling to fit the Novak GTB properly into the space provided. The only way I have managed to do it is to attach servo tape to the sides of the speedo rather than the bottom and stick it to the chassis walls. Other than this there doesnt seem anywhere suitable for the power cap other than in the slot behind the speedo which would mean I wouldnt be able to use the car with 6 cell configuration.
Additionally can you fit the upgrade Novak micro fan under the X-6 shell either on top of the speedo or elsewhere?

Some pictures would be good if anybody has a neat GTB install (nudge nudge Chris Long!)

Cheers Lads


Chris

[MikePimlott]

Here Chris look at Dans installation.

http://www.oople.com/forums/showthre...?t=4829&page=2

allthough the cap is in the 6th cell place.

[Chrislong]

Chris, if you have to use the 6 cells accross the chassis layout (which isn't great), then you have the space for the 2 cells at the front spare for the power cap.

Chris

[Chris Elworthy]

Of course Chris, I should have thought of that

Thanks lads


Chris

[super__dan]

Chris,

Obviously I'm biased but the way I have mine (or the mirror with a 3 gear) seems best. 6 cells across the back is just wrong in my opinion where as the cap weighs hardly anything so no probs with it out there. Some run a PT in the 6th cell place the other side though I have mine on top of the servo. I do remove the height of the plastic chassis rail at the back of the speedo (where the wires are) for a little more room.

[janus_77]

http://www.2wdrc.com/tech_GTB.htm