LRP Competition Car Line 4800mha 40C Saddle Pack LiPos

[Itie RC]

I have two LRP Competition Car Line 4800mha 40C Saddle Pack LiPos. They have been used for approx ten race meetings over this summer, so have plenty of life left in them.

I use them in my CAT SX, but bought saddle packs because I wanted to be able to use them in a Cougar SV too, which I was planning on buying on release, but never did.

To get them to fit I had to file down the lumps on the bottom of the cases on one side, so unfortunately the cases are quite battered & bruised, one even has a little melt spot on it when I was soldering a wire too close to it and slightly melted the case, but hasn’t gone through or anything like that, just a melt spot. (see pics)

They also already have the Schumacher LiPo locators super glued to them, so they fit a CAT SX perfectly, you can see from the pictures. I have made up a little corrally connector to connect both saddles together. (see pics)
You can see from the pictures where I've filed the lumps off, so there are no surprises, but you'll also see that I've used electrical tape to finish them off nicely.

All this said, they work absolutely 100% great, and are ballistic. The actuall LiPos themselves haven't been harmed in any way what so ever, they just have battered & bruised cases, and assuming that LiPos have a life cycle of 100 or so charges at their best, both these packs have got at least two thirds of their best life left.

They have always been charged at 1C (4.8v) as recommended by LRP, and when not in use have always been stored at 7.6v, again as recommended by LRP.

Due to the battered & bruised cases, it's clear I can’t sell these for as much as I'd like to, so they are going for £30 per pack, or £50 for both packs. A bargain considering they're £100 each new.

They come with their original packaging and manual.

You can see photos at the link below.

http://picasaweb.google.com/10590204...ddlePackLiPos#

Cheers
Joe