511 drive shaft shims

[MHeadling]

Does anyone happen to know the part number for the little drive shaft shims on the 511?

They are little cnc machined silver ones, I need 4 x of them as the car im working on hasnt got them fitted and the drive shafts at the end of the outdrive!

[MHeadling]

Are these the right thing??

Tamiya 9804246

Also the car I'm working on has rear outdrives with lightning holes in them? Are these a Tamiya option part? They are a bit worn so need replacing.

Are the 501 diff outdrives the same as the 511??

http://www.rc-mushroom.com/product_i...ducts_id=12005

[Fredrik Emilsson]

Think your outdrives are 3Racing ones.

511 outdrives same as 501X

Part nr for spacers are correct. (I suppose you mean the ones on the wheel axle?)

[MHeadling]

Thanks fredrick!

Yes it's the wheel axle shims that go on the inside of inner wheel bearing on rear hub, ie push's driveshaft into out drive a bit more

[super__dan]

Are there ones available thinner than these?

I ask as the rears on my car are perfect fit but there is a little play on the fronts which on any other car I'd shim out. I don't have any 5mm shims though only whatever size the AE wheel axles are

[Donutt]

Guys

There's a 5mm Shim set from Tamiya #53587

Comes with 10 each of 0.1, 0.2 & 0.3mm shims

Perfect for shimming everything out the driveshafts, and still avoiding binding.