|
#1
|
|||
|
|||
![]()
i just built my 501x and it seems that the steering at the knuckles is kinda stiff...anybody encounter that and if you did, how did you fix it ?
|
#2
|
||||
|
||||
![]()
Use a small drill to make the holes in the steering blocks a little bit bigger, that should help making it smoother.
|
#3
|
||||
|
||||
![]()
I mentioned this on page 6 of the review - I think the holes don't line up properly so I drilled straight through with a 2.5mm drill bit which helped a lot. It does ease off after time though when the car has been run a few times.
![]() |
#4
|
|||
|
|||
![]()
thanks guys
|
![]() |
Thread Tools | |
Display Modes | |
|
|