Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 01-08-2007
Richard Lowe Richard Lowe is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Mar 2006
Posts: 2,398
Default LRP Sphere error codes

Does anyone have a list of error codes for the Sphere/Matrix?

I've just given my B4 a going over before Southport and gave it a run around outside, first time I gave it some beans the throttle cut out and the ESC had the orange mode light on solid. I'm guessing thats the over-current protection as it was from a standing start? Turning it off and on again it worked again but cut off when under load, unplugging the battery for a minute or so seems to have sorted it hopefully, wierd
Reply With Quote
  #2  
Old 01-08-2007
grindog grindog is offline
Senior Member
 
Join Date: Jan 2007
Location: stoke on trent
Posts: 434
Send a message via MSN to grindog
Default

Hi, mine did this. I think it is some sort of motor jamming code when in reality, there is nothing wrong. When it does it, try to turn the spur and see if it clears up for a few seconds. Mine did this with both brushless and brushed motors so was replaced under warranty. It always seemed to be at low revs when it jammed.

Hope i am wrong and good luck
Reply With Quote
  #3  
Old 01-08-2007
grindog grindog is offline
Senior Member
 
Join Date: Jan 2007
Location: stoke on trent
Posts: 434
Send a message via MSN to grindog
Default

thinking back, i think i had different colour lights come on but the problem sounds the same
Reply With Quote
  #4  
Old 01-08-2007
bert digler's Avatar
bert digler bert digler is offline
Mad Member
 
Join Date: Mar 2006
Location: 500yds from matty simpson
Posts: 1,608
Default

Quote:
Originally Posted by Richard Lowe View Post
Does anyone have a list of error codes for the Sphere/Matrix?

I've just given my B4 a going over before Southport and gave it a run around outside, first time I gave it some beans the throttle cut out and the ESC had the orange mode light on solid. I'm guessing thats the over-current protection as it was from a standing start? Turning it off and on again it worked again but cut off when under load, unplugging the battery for a minute or so seems to have sorted it hopefully, wierd
just check motor with cap off any shit in sensor and motor plates on wires ie shorting out
__________________
who knows who cares
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com