|
||
|
 |
|
||||||||||||||||||
|
#1
11-04-2010
|
|||
|
|||
SC10 Diff in XPro
Hallo guys,
I`ve heard the differential of the sc10 (AS9827) fits in the Ansmann Xpro. Does anybody know if this is correct? Thanks for your help. mfg Stephan 
|
|
#2
11-04-2010
|
||||
|
||||
|
If yes, that could be cool ! BUT I'm really not sure, juste because of the bearing ball metric size of the xpro and the american size of the sc10 one. And the sc10 diff is larger than the ball diff of the B4... But maybe I'm wrong.
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/
|
|
#3
11-04-2010
|
|||
|
|||
|
the bearings would be no problem, if you use the ones of the old yokomo One-Way for the TC3/TC4.
|
|
#4
11-04-2010
|
||||
|
||||
|
Well, maybe... where have you heard that ?
__________________
Tamiya F103 - Hobbywing 13.5 - Hobbywing 1S Tamiya TRF201 - PRT HS 10.5 - Tekin RS Pro http://rctouch.over-blog.com/
|
|
#5
12-04-2010
|
||||
|
||||
|
i am very interested to see if this fits please try and let me know
__________________
DO NOT BUY/SELL TO THIS USER.
|
|
#6
12-04-2010
|
||||
|
||||
|
I'm a bit suspect of this working...
The SC10 does look like most things would fit..but after spending well over £30 on some B4 parts that I was sure would fit...none did LOL... Ball caps and fixings. It was my own fault... I should have thought first of the imperial/metric issues. The parts I got 'almost' worked but were all just a fraction to small to work properly...all the ball cups were too tight and fixings just a tiny bit to loose... It might work and I'd be interested to see...but that tiny difference between imperial and metric I think will be the defining factor. J
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Ansmann Racing
Linear Mode
