|
||
|
 |
|
||||||||||||||||||
|
#1
02-04-2010
|
||||
|
||||
KO vantage Steering problem
Hi All
I have an old esprit 2 that I have got working. Its all fine other than full lock is about 50% of what it should be in either direction. (compared to my esprit 3 and old vantage, acoms etc) Ive checked the settings and they are all correct, obviously the pots should be good (ive checked in the System layer). But the range seems odd. Any ideas? Cheers C
__________________
http://www.thercracer.com/ 
|
|
#2
02-04-2010
|
||||
|
||||
|
The top right knob reduces steering, it has to be fully clockwise to give full lock.
__________________
Durango DEX410 Schumacher Cat SX Associated B4 FT Ludlow Radio Car Club LRCC Youtube Vid.
|
|
#3
02-04-2010
|
||||
|
||||
|
cheers, I took a look and its fully rotated. I did notice though on the steering travel screen (set to 150) when I press select it comes up with 76 which goes down to 60 when I rotate the steering range knob (top right) is this right?
__________________
http://www.thercracer.com/
|
|
#4
02-04-2010
|
||||
|
||||
|
If I do that mine goes from 150 down to 60 as I turn the knob. It doesn't suddenly drop to 76.
__________________
Durango DEX410 Schumacher Cat SX Associated B4 FT Ludlow Radio Car Club LRCC Youtube Vid.
|
|
#5
02-04-2010
|
||||
|
||||
|
top one.. at least this must be the fault
__________________
http://www.thercracer.com/
|
|
#6
02-04-2010
|
||||
|
||||
|
FIXED it
Changed the TRAVEL to et4 and its all good. Just means my ET3 is a bit odd. I can live with that
__________________
http://www.thercracer.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
