|
#1
|
||||
|
||||
![]()
I am have a problem with x6 squared getting the gearing right,i am going a speedpassion esc speedpassion 7.5 motor and 5300 lrp lipos.the gearing i use is 24/76 it feels like it has no top end as the track i race on is the new titchfeild track witch is a long astro turf that is fast and flowing the motor is getting hot but not overly can still touch it after the race can anyone help me out
cheers chris |
#2
|
||||
|
||||
![]()
I'm on 24*76 with a 8.5 but with some extra timing so you're not a world away
__________________
Nortech is ACE! |
#3
|
|||
|
|||
![]() Quote:
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#4
|
|||
|
|||
![]()
I run a 27 pinion on an SP 7.5 with the same spur so you are far away
![]() You can go as high as a 28 as well if it still lacks a little top speed but heat may be an issue then if it is a warm day. E. |
#5
|
||||
|
||||
![]()
FYI, even if it was 14631 teeth gear or 16813 gears extra it wouldn't affect. :-)
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
#6
|
|||
|
|||
![]()
If the X6 used two "differnet size idlers" (differnet to each other) then the ratio would be different to the B4
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#7
|
||||
|
||||
![]()
Want a bet?
![]() They don't because they are in line and don't drive another gear that's on the same axle (cfr. spur and little gear in that same axle)
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. |
![]() |
Thread Tools | |
Display Modes | |
|
|