tamiya 416x

[jayst]

most of the spares are nip

short reversible wishbones x 2
C hubs x4 + 3x L , 1 x r loose
rear hubs x1
shock parts x2
steering blocks x2
ball cups x8
4mm driveshafts steel x3
cross joints for driveshafts x4
wheel axles x1 + 2 loose but new
42mm lightweight driveshafts x1
wheel spacers x1
driveshaft blades x1
spring set x1
trf shock o-rings loose but new
46mm hinge pins x2
shock shaft x3
shock o-rings and spacers x1
shock diaphams x2
5mm short adjuster x1
26mm hinge pins x1
5mm suspension balls x1
florine coated head king pin set x3
wheel bearings x2
3mm shim set x1
5mm shim set x1
10mm shim set x1
some shims loose and new bearings
bumper x1
rear belt x1
front belt x1
front and rear belts used but good condition
m4 flanged nuts x1
yeah racing alloy rear hubs x1
tamiya allot rear hubs x1
stabilizer ends x1
HB stabilizer ends x1
5x8mm ball studs x1
5mm ball studs x2
1b , 2x 1c , 2 x 1xa suspension blocks nip
5mm ball nuts x1
blue turnbuckles
spool outdrive savers
suspension spacers x1
ball cup x2
3racing 35mm turnbuckles
3racing 25mm turnbuckles
complete new diff inc ceramic balls and thrust
front 1 way pulley x1
diff plates x1
centre pulleys x1
standard thrust x2
top racing ceramic thrust x1
diff screw and nut x2
diff protectors x1
ghost rc ceramic diff balls x1
ghost rc o-rings x1
2 bags of new and used parts

trf tools
1.5mm end twisted but still usable
2.0mm
5mm nut driver
7mm nut driver
2 x turnbuckle spanners
muchmore diff master
2 boxs of screws , shims , spacers etc












the car has just been rebuilt and used for 1 meeting . there is a spool for the car thats being measured up for alloy outdrives . NO electrics included . may split . i have pics of spares aswell . pm me for more pics and info

EVERYTHING SOLD